Home / News / Tips / Operation guide for tank truck users

Operation guide for tank truck users

Aug. 30, 2021

1. In order to ensure the cleanliness of the tanker, the tank and the oil delivery system should be cleaned regularly, and the internal and external joints at both ends of the oil delivery hose should be frequently coated with lubricating oil, so that the tanker can be easily disassembled and assembled. Clean the tubing in time after each work to ensure that the tubing is clean!

  2. The use and maintenance of the oil pump of the tanker truck shall be carried out in strict accordance with its operation and maintenance instructions!

  3. Before refueling operation, you must use the electric pole to insert into the wet ground, the grounding tape of the tanker should be grounded, and the static electricity should be kept well during the operation!

  4. The safety valve and filter net of oil tanker should be checked and cleaned frequently!

   5. Oil tanks and piping systems should be cleaned regularly. The oil tanker regularly checks whether the joints of the pipeline system are well connected and the seal is reliable!

6: Tank trucks should install electrostatic belts in accordance with the specifications. When static electricity encounters the extremely high concentration of combustible gas remaining in the vehicle, it will explode. The electrostatic belt will frequently rub against the car body and the space where static electricity is easy to generate can be effectively removed. Static electricity hazards to ensure that the body is not harmed.

      installation method:

   can be installed on the metal part of the chassis! After a period of time, after the bottom part is worn out, you can put down some of the rubber band on it!

  Conditional users can install tank truck electrostatic grounding alarm

      7. Tank trucks should be equipped with special fire extinguishers, and tow train chains and electric poles should be installed. When driving, the towline chain should touch the ground; when refueling or draining, the electric pole must be inserted into the damp ground.

  8. The oil tank filling hole should be tightly sealed, the oil drain valve and drain pipe should be free of leakage, the oil tank vent hole should be unblocked, the oil pump inlet filter should be cleaned frequently, and the two ends of the joint cover should be installed immediately after the oil delivery hose is used up. No dirt should enter.

  9. The vaporizer and exhaust pipe of the internal combustion engine must not have flashback. The exhaust pipe should be installed in front of the vehicle.

  10. The staff of the oil tanker shall not wear shoes with nails. Smoking is strictly prohibited near oil tanks, and fire is strictly prohibited.

  11. When parking, keep it away from fire sources, and choose a shaded place to park in hot seasons. During thunderstorms, do not park under big trees or high-voltage lines. When parked in the middle of driving, a special person should take care of it.

  12. During the maintenance process, if the operator needs to enter the oil tank, it is strictly forbidden to carry fire, and must have reliable safety protection measures, and special personnel must be supervised outside the tank.

  13. All electrical devices on the car must be well insulated, and sparks are strictly prohibited. Car working lighting should be safety lights below 36V.

  14. When the oil tank sedimentation tank is frozen, it is strictly forbidden to use fire. You can melt it with hot water or steam, or drive the car into the warm room to thaw.

  15. When performing maintenance and overhaul under the vehicle, the internal combustion engine should be turned off, the hand brake should be tightened, and the wheels should be tightened.

  16. When a vehicle needs to be tested after being repaired, it should be driven by a qualified person. No persons or objects are allowed on the vehicle. When the vehicle needs to be tested on the road, the test license issued by the traffic management department should be displayed.

  17. When parking on a ramp, reverse gear should be used for downhill parking, first gear should be used for uphill parking, and a triangular wooden wedge should be used to plug the tires.


Share:
  • wechat
Chat with Us

Contact Us
  • E-mail: lhautoparts88@gmail.com
  • Tel.: +86 17686798823
  • Fax: +86 531 6865 8175
  • Skype: lhaxle@outlook.com
  • WhatsApp: +8617686798823
  • Add.: Room 1110, Building 2, Hisense Xianwen Center, Industrial South Road, High-tech Zone, Jinan City, Shandong Province
Request a Quote